Category: Dream

Lucid signal at 06:20
Morse code from Lucid Dream at 06:21
Here we go my first letter from Morse done in LD.
The method to apply it, is to trigger movement of the eye to be seen on EEG.

So here we have the letter F for movement (LLRL) this make EEG signal an arrow down for left and arrow up for the right movement.

This need practice, first to know Morse in real life and to apply after in dream.

Youhouuuuuuu 😉

Download entry as Lucid Scribe Data (LSD) (5 MB) or as EDF with hypnogram (15 MB).

2022-04-29 – Dreaming Detected

The volume was too low for the audio to be heard, but rapid eye movements were detected twice.

Download entry as Lucid Scribe Data (LSD) (691 MB).

2022-03-09 – Zoom

Inspired by the optic and software zoom on Sebastiii’s security camera, I doubled the resolution on the inspec camera and saw immediate improvement when monitoring via Lucid Scribe. It might need some further optimizations for the standalone version that runs on the firmware to keep up, but if it drops a few frames here and there it should still catch enough eye movements.



The algorithm detected rapid eye movements three times in a row at around 6 am, with no false positives during the night.

Download entry as Lucid Scribe Data (LSD) (386 MB).

2022-02-24 – INSPEC Video Feed

Lucid Scribe can now tap into the video feed from the INSPEC camera if it is plugged in via USB, which will allow for parallel tests against the algorithm on the device’s firmware. Recorded 3 positives and 0 false positives with audio on mute for testing.

Download entry as Lucid Scribe Data (LSD) (108 MB).

2022-02-17 – Head tilt

REM at 0317

As you can see, most often in my dream, I have head tilt, it doesn’t awake make and my dream is running.


I think that my body is not fully paralyzed, I didn’t do big movement like fighting but I can move easily, I know that when I’m doing that in Lucid Dream, it can wake me up in a second while it won’t wake me up in a normal dream.

Download entry as Lucid Scribe Data (LSD) (2 MB).

test with lucid scribe 1.5.5
Thanks to the latest updates, the errors that happen to me are gone. Now REM detection is achieved without a problem, thank you very much for your great work Michael.

I added a new channel that shows when the vREM channel is disabled because large movements have been detected. The minimum and maximum values that define eye movements are now also configurable.

Captured a good REM session starting at 0545.

And here the Toss threshold was reached from eye brow movements during a dream. An extra configuration for the amount of movements above the toss threshold within a timeframe could fix that. 

I used the following settings and had only one false positive while settling down to sleep:

Download entry as Lucid Scribe Data (LSD) (605 MB).

The audio track woke me up after just a few seconds. My eyes can be seen opening in the real world after looking around in the dreamworld in the minute featured above. I have since started a shortlist of tracks that play only a few melodies for a couple of seconds that we have been having more luck with: Shortlist.

Download entry as Lucid Scribe Data (LSD) (103 MB).

I rolled into position at 0320 and was dreaming for the better part of the hour. The audio triggered at 0333, again at 0334 and I dreamt through the tracks without waking. I recalled 3 dreams.

Download entry as Lucid Scribe Data (LSD) (127 MB).

EOG REM Eye Movements

I now have a setup that is fit for a princess! And finally have my wife hooked up… she can be seen sneaking in a dream amidst her beauty sleep in the minute above.

The algorithm had a good time picking up her eye movements – the dark eye-lashes helped it along nicely.

Download entry as Lucid Scribe Data (LSD).